Reese Towpower 21346 Class III and IV Ball Mount Review

Average Reviews:

(More customer reviews)Measurements were exactly as expected and worked perfectly to tow our new boat. The information on the Amazon site provided all the information we needed to ensure that we purchased the right product so that we could be up and running quickly.

Click Here to see more reviews about: Reese Towpower 21346 Class III and IV Ball Mount

Get 21% OFF

Click here for more information about Reese Towpower 21346 Class III and IV Ball Mount

Read More...

Valley 82780 Class II Receiver Hitch Review

Average Reviews:

(More customer reviews)The hitch arrived quickly and in good condition. It didn't come in a box or anything like that because of the shape and size. The holes on the hitch didn't quite match up to the holes on the frame of my Jeep. I found this out after I had it up against the frame. I had to make the holes bigger on the hitch by 1/8" so it could line up. After that it was fairly easy to install. I used a floor jack to hold the hitch up while I bolted it on.

Click Here to see more reviews about: Valley 82780 Class II Receiver Hitch

Get 5% OFF

Click here for more information about Valley 82780 Class II Receiver Hitch

Read More...

Reese Towpower 21554 Interlock Towing Security Starter Kit Review

Average Reviews:

(More customer reviews)I recently purchased this for my new truck to pull a U-haul and a jet ski trailer. The price is great considering it has the bar, ball, bag, and locking pin. I know many people who have lost there hitches due to thieves pulling the non-locking pins and taking them. This way I don't have to worry about leaving this on my truck in the parking lot and comming back to a complete truck.
The back is sturdy and is a great idea to keep everything together, clean, and most importantly rust free.
I kighly recomment this set-up for your trucks.
-Will Southerland

Click Here to see more reviews about: Reese Towpower 21554 Interlock Towing Security Starter Kit

Get 36% OFF

Click here for more information about Reese Towpower 21554 Interlock Towing Security Starter Kit

Read More...

Smittybilt JH44 Hitch Review

Average Reviews:

(More customer reviews)Bought this hitch based on the price. Once it arrived, I read the directions only to find that once the hitch is installed, you cannot reattach the stock rear bumper. The outside of the box read something about a tube bumper so I don't know if you could mount a tube rear bumper. I returned it for a refund with no problem from Amazon.

Click Here to see more reviews about: Smittybilt JH44 Hitch

Get 38% OFF

Click here for more information about Smittybilt JH44 Hitch

Read More...

Valley 81680 Class III Receiver Hitch Review

Average Reviews:

(More customer reviews)First off, to clear the confusion, this does work with the 16" (full size tire) spare. You need to lower the tire to install the hitch and then after it is installed you can raise the tire. Just a slight push forward to clear the hitch and it goes right in to place. The installation is very simple and only requires a few hand tools. Four bolts in existing holes and you are done. Quite honestly it couldn't be easier. One bad thing that happened was that Amazon shipped me this hitch without the bolts. You could tell it was a return because they shipped it to me from their returns department. Someone at Amazon didn't know the bolt pack was missing and shipped it out. I called Valley and they immediately sent out a bolt pack free of charge. So aside from Amazon's screw up this was a good deal overall. The hitch is inexpensive and strong and easy to install.

Click Here to see more reviews about: Valley 81680 Class III Receiver Hitch

Get 42% OFF

Click here for more information about Valley 81680 Class III Receiver Hitch

Read More...

Hidden Hitch 87005 Class III Hitch Review

Average Reviews:

(More customer reviews)I received the hitch promptly and it took me about a half hour to install. What took me the longest was cleaning the dirt out of the bolt holes on my vehicle. Then it went up very easily.

Click Here to see more reviews about: Hidden Hitch 87005 Class III Hitch

Get 34% OFF

Click here for more information about Hidden Hitch 87005 Class III Hitch

Read More...

Curt Manufacturing 55540 T-Connector Review

Average Reviews:

(More customer reviews)I saved $170 by installing this along with the wiring and ball hitch myself. Hardest part was getting the panels loose inside my van to snap in the wiring harness. If you are somewhat hands on this should be pretty easy more time than effort.

Click Here to see more reviews about: Curt Manufacturing 55540 T-Connector

Get 43% OFF

Click here for more information about Curt Manufacturing 55540 T-Connector

Read More...

HitchHide Ball Mount Storage Bag Review

Average Reviews:

(More customer reviews)Update, Jan 7 2009
This product has failed because the zipper will no longer stay zipped- it peels open as soon as I zip it closed. Now, instead of a storage bag, it's a storage sling.
Finally- something to keep my drawbar, pin and lock organized; keep all this stuff from sliding around in the back of the truck and keep their dirt off everything else. Only time will tell, but the material and zipper seem tough enough to last.

Click Here to see more reviews about: HitchHide Ball Mount Storage Bag

Click here for more information about HitchHide Ball Mount Storage Bag

Read More...

Valley 82320 Class III Receiver Hitch Review

Average Reviews:

(More customer reviews)I just finished doing the install on this hitch, and it is definitely NOT easy and DOES require drilling. A lot of drilling actually. I don't know if there is a hitch for the Sienna that doesn't, but this one's not it. If you want to know what you're getting into, search for an install video for the '98 Toyota Sienna trailer hitch (etrailer.com I think) and it's just like that. You have to drill into the frame to install bolts on either side and expand an access hole in the frame. They don't even offer any suggestions in the instructions on how to do that. I ended up drilling a number of small holes and widening them with successively larger drill bits until I got the whole thing big enough. I'm still nursing injuries from this one. Little bits of hot metal from the drilling burn and cut your skin pretty easily. Safetly goggles are a must! Recommend leather gloves, and a very good drill, and lots of good bits that go through steel well, and something to raise the van on would have made it easier too. If you do choose to do it, good luck!

Click Here to see more reviews about: Valley 82320 Class III Receiver Hitch

Get 50% OFF

Click here for more information about Valley 82320 Class III Receiver Hitch

Read More...

Reese Towpower 51031 Class III Hitch Receiver Review

Average Reviews:

(More customer reviews)It went right on fits just like a factory hitch. It's well made and should last for years to come

Click Here to see more reviews about: Reese Towpower 51031 Class III Hitch Receiver

Click here for more information about Reese Towpower 51031 Class III Hitch Receiver

Read More...

Tow Ready 118304 T-One Connector Assembly Review

Average Reviews:

(More customer reviews)I installed this wire harness on my 2005 Sienna in about 20 minutes. You don't need to have any mechanical ability. Here is a video on how to do it [...]. I recommend you order this trim panel tool OEM 25313 Door Panel Remover for the job. $8 is a small price to pay to avoid breaking a clip and forever having a loose panel. I didn't think to order it and had to buy it at an auto parts store at the last minute for $3 more. I saved about $200 over what the dealer charged by getting this and my hitch (Curt Manufacturing 13256 Class III Receiver) on Amazon and installing them myself.

Click Here to see more reviews about: Tow Ready 118304 T-One Connector Assembly

Click here for more information about Tow Ready 118304 T-One Connector Assembly

Read More...

Softride 25735 QuietRide 6" Drop Steel Ball Mount Review

Average Reviews:

(More customer reviews)Love the anti rattle, love the locking pin, love the powder coat, love the price for the design features. This is a no brainer for me.

Click Here to see more reviews about: Softride 25735 QuietRide 6" Drop Steel Ball Mount

Click here for more information about Softride 25735 QuietRide 6" Drop Steel Ball Mount

Read More...

Valley 51810 Adapt-A Ball Review

Average Reviews:

(More customer reviews)This product is versatile and easy to use. It is useful to have a small screwdriver or punch to tap out the center pin to remove the ball. Because of its ease, it can present an opportunity for someone to relieve you of ownership of the ball you have installed on the mount. I usually remove the ball, or even the entire hitch and store it away until I need it. Great product, excellent quality. Pros: Easy, versatile, well made. The only cons I see are the ease to steal and added need to store away the balls that are not installed on the mount.

Click Here to see more reviews about: Valley 51810 Adapt-A Ball

Get 26% OFF

Click here for more information about Valley 51810 Adapt-A Ball

Read More...

Curt Manufacturing 45020 Straight Ball Mount 10 1/4 In Review

Average Reviews:

(More customer reviews)Seems to be well made, but have not tested with a load yet. I get a little concerned when parts that bear weight are two piece, flat welded, but the welds do seem very solid.

Click Here to see more reviews about: Curt Manufacturing 45020 Straight Ball Mount 10 1/4 In

Get 38% OFF

Click here for more information about Curt Manufacturing 45020 Straight Ball Mount 10 1/4 In

Read More...

Curt Manufacturing 14090 Class IV Receiver Review

Average Reviews:

(More customer reviews)There aren't many hitches available for extended length vans. This one fits perfectly with no drilling. I had it professionally installed because I also had some electronics work done at the same time. You'll be happy with it.

Click Here to see more reviews about: Curt Manufacturing 14090 Class IV Receiver

Get 47% OFF

Click here for more information about Curt Manufacturing 14090 Class IV Receiver

Read More...

Curt Manufacturing D-126 Forged Ball Mount 1 1/4 In Hole 6 In Drop Review

Average Reviews:

(More customer reviews)I have come to expect only the heaviest duty products from this manufacturer. as with other trailer towing equipment. I searched my region to buy locally. I knew what my needs were and no local retailers carried equipment of this standard. Outstanding product!

Click Here to see more reviews about: Curt Manufacturing D-126 Forged Ball Mount 1 1/4 In Hole 6 In Drop

Get 31% OFF

Click here for more information about Curt Manufacturing D-126 Forged Ball Mount 1 1/4 In Hole 6 In Drop

Read More...

Reese Towpower 21543 Class III Towing Starter Kit Review

Average Reviews:

(More customer reviews)What differentiates this tow kit from others is the "interlock". The "interlock" refers to the shape of the base of the ball. It is hexagonal rather than round like they typically are. The ball mount also has the hex shape formed into it so that the hex ball sits down into the hex shape of the ball mount. This prevents the ball from spinning, which is very handy when you want to remove the ball from the ball mount, when for example, you want to switch to a different size ball. With a normal round-based ball, when you attempt to remove the nut on the bottom, the ball just spins and you get frustrated trying to remove it. I had this happen and ended up taking it to a local U-Haul to get it removed. Now I know you can use a huge pipe wrench to how the base of the round-based ball while removing the nut...but how many people have big pipe wrenches? With the "interlock" hitch, just insert the ball mount into your vehicle's hitch receiver and then reef on the nut with a large wrench (which you can buy here on Amazon). Other than the "interlock" feature, this hitch kit is pretty standard and will do the job.

Click Here to see more reviews about: Reese Towpower 21543 Class III Towing Starter Kit

Get 37% OFF

Click here for more information about Reese Towpower 21543 Class III Towing Starter Kit

Read More...