Showing posts with label hitch mount. Show all posts
Showing posts with label hitch mount. Show all posts

10/01/2012

4-Bike Wheel Cradle Mount Bicycle Carrier Review

4-Bike Wheel Cradle Mount Bicycle Carrier
Average Reviews:

(More customer reviews)
This rack is junk. I installed it and placed 3-bikes on it. As soon as I pushed down the ratcheting hold downs, the bottom wire cradles bent down and the bikes were not even close to being secure. There's no way I would trust this rack with any bikes. I returned the item. I had to eat the shipping costs.

Click Here to see more reviews about: 4-Bike Wheel Cradle Mount Bicycle Carrier



Buy Now

Click here for more information about 4-Bike Wheel Cradle Mount Bicycle Carrier

Read More...

9/11/2012

TRIMAX MAG200 Review

TRIMAX MAG200
Average Reviews:

(More customer reviews)
An easy to use, strong way to lock a hitch or tow bar to your vehicle. I own six for all my tow bars and hitches.

Click Here to see more reviews about: TRIMAX MAG200



Buy NowGet 22% OFF

Click here for more information about TRIMAX MAG200

Read More...

7/15/2012

Alumistinger 3507 by Andersen Manufacturing Aluminum Ball Mount, 6" Drop Bar - 1" Shank Hole Review

Alumistinger 3507 by Andersen Manufacturing Aluminum Ball Mount, 6 Drop Bar - 1 Shank Hole
Average Reviews:

(More customer reviews)
I bought to use on my new Tahoe which needed a 6 inch drop. Excellent quality, quiet, heavy duty ball mount which was cheaper than any other place I found. I got the new credit card which took a additional $30 off. Light in weight and good looking enough that I sometimes just leave it in after I use it.

Click Here to see more reviews about: Alumistinger 3507 by Andersen Manufacturing Aluminum Ball Mount, 6" Drop Bar - 1" Shank Hole



Buy NowGet 31% OFF

Click here for more information about Alumistinger 3507 by Andersen Manufacturing Aluminum Ball Mount, 6" Drop Bar - 1" Shank Hole

Read More...

3/31/2012

Curt Manufacturing 45521 3 1/4 Drop W/ 7 1/8 In Bar Class I and II Ball Mount Review

Curt Manufacturing 45521 3 1/4 Drop W/ 7 1/8 In Bar Class I and II Ball Mount
Average Reviews:

(More customer reviews)
The item was fine but the dimensions listed were WRONG. The Item is actually smaller than listed. Thus, it did not fit. The length was too short. You should verify the dimensions with the manufacturer (Curt Manufacturing) before you purchase this item.

Click Here to see more reviews about: Curt Manufacturing 45521 3 1/4 Drop W/ 7 1/8 In Bar Class I and II Ball Mount



Buy NowGet 38% OFF

Click here for more information about Curt Manufacturing 45521 3 1/4 Drop W/ 7 1/8 In Bar Class I and II Ball Mount

Read More...

3/26/2012

Allen Deluxe 5-Bike Hitch Mount Rack (2-Inch Receiver) Review

Allen Deluxe 5-Bike Hitch Mount Rack (2-Inch Receiver)
Average Reviews:

(More customer reviews)
UPDATE as of June 12, 2009: I've only twice used this bike rack to tote 5 bikes on a trip. I just don't have confidence in the physical build of this design, and it's not worth the mental anguish wondering whether I'll kill someone because the bike rack broke while transporting 5 bikes at 65 mph. It's sitting in my garage now, where it's been the last year.
---------------------------------------------------------
I researched Amazon to find a bike rack that could transport 5 bikes. I chose this one mainly on the strength of the generally favorable reviews and because it was priced considerably lower than other products.
In short, the bike rack did what it said it would do, but I'd prefer a few design changes.
Firstly, the rack, after installing it into the hitch, tends to sag to the ground rather than protruding straight out of the hitch. On our Dodge Grand Caravan minivan, this posed a problem: when fully loaded, the trailer hitch was FOUR INCHES from the ground! If we were going to travel over sizeable speed bumps or travel over roads with sizeable gradient changes, the hitch was going to scrap the ground! In fact, backing out of the driveway caused the hitch to scrape the ground, and I had to physically lift the hitch up as my wife slowly backed out of the driveway! On vehicles where the hitch is 18 inches off the ground, this isn't going to by your concern, but if you're driving a minivan or other vehicle where the hitch is only 8 inches or so off the ground, then this IS a concern.
The "no-wobble" bolt that affixes the bike rack to the hitch actually bowed the part of the bike rack that slides into the hitch inward due to the pressure. You could argue, I suppose, that I overtightened the bolt. I would argue that my puny arms shouldn't cause the bike rack to bow at all -- there should be enough steel in the rack to keep that from happening.
I didn't have a problem getting the 5 bikes installed, but it takes some time and effort to arrange the bikes in a way that they all fit. Be aware, though, that our taillights were very badly obscured by all the bikes. In the future, I think I would like to add some trailer lights to the last bike on the rack to make brake lights easier to see.
While traveling down the interstate, I can tell you I had an uncomfortable feeling watching the bike rack bump up and down each time I went over a bridge. I felt like at anytime, the physical structure would break and I'd have 5 bikes flying across the interstate road.
In short, this bike rack did do what it said it would do, but I didn't have peace that this solution was one I would want to use repeatedly in the future. I'll keep my eye out on a small trailer on which I might be able to tow our bikes.

Click Here to see more reviews about: Allen Deluxe 5-Bike Hitch Mount Rack (2-Inch Receiver)

This Deluxe Hitch Mounted Bike Carrier by Allen holds five bikes and is ideal for weekend biking trips with friends and family outings. A tie-down system securely holds and protects each bicycle while 28-inch carry arms drop out of the way when not in use. Appropriate for two-inch hitches, this carrier includes a strap which eliminates lower bike movement. Minor assembly and simple set up of the carrier is required.
About Allen Bike Racks In 1967, after a few years of working on the aerospace technology for the Apollo missions, Dick Allen was out of a job. Government cutbacks led Allen, a Harvard-trained physicist, to transform his garage hobby into a new industry. A cycling enthusiast, inventor, and family man, Allen had a personal need for a bike-carrying device. On weekends, he would take his sons and wife to Cape Cod or the White Mountains of New Hampshire. What proved difficult time and again was the transport of his family's bicycles. Rather than fight through inconvenience with twine and a dinged car, Allen sought an answer for himself as well as a market in which he foresaw major growth possibilities.
Always a pathfinder, Allen took to work in his Lincoln, Massachusetts garage in search of a more efficient way to transport bikes. Drafting designs during the day and constructing them throughout the night, he put together a model made of electrical conduit, metal strapping, and fire hose casings (for padding). At first, the Allens' tested the prototype on weekend excursions. Finding the first trunk-mounted rack to be a success, Dick started Allen Bike Racks. Dealer acceptance came quickly, and by 1971 Allen Bike Racks were sold nationally through a number of major bicycle distributors. Today, the company owns over three dozen patents and offers a versatile product line of bike racks while Dick's son Alex now owns and operates the business. What started out as a small garage run operation now operates three warehouses nationally, two factories abroad, and has products sold in more than a dozen countries around the world.


Buy NowGet 22% OFF

Click here for more information about Allen Deluxe 5-Bike Hitch Mount Rack (2-Inch Receiver)

Read More...

2/23/2012

Reese Towpower 21512 Multiple-Ball Ball Mount Review

Reese Towpower 21512 Multiple-Ball Ball Mount
Average Reviews:

(More customer reviews)
Although Reese manufactures GREAT products of which this is but
one, the prices here are sometimes absolutely borderline RIDICULOUS!
IF you are anywhere near a Walmart, this same device is 37.98 + Tax.
Here in CA, that would be a mere 8.75% or 3.32 for a whopping total
of 41.30 Forgive me for being such a nitpicker but with today's
economy pretty much in the tank you gotta save every which way you can!

Click Here to see more reviews about: Reese Towpower 21512 Multiple-Ball Ball Mount



Buy NowGet 50% OFF

Click here for more information about Reese Towpower 21512 Multiple-Ball Ball Mount

Read More...

1/17/2012

Yakima HitchLock with Core Review

Yakima HitchLock with Core
Average Reviews:

(More customer reviews)
I bought this hitch lock for a 2002 yakima full swing bike carrrier that I purchased used. The lock traveled 4000 miles holding the carrier in place. It is easy to use except you can not fit the key hole cover on as it was too tight. That wasn't significant and didn't effect the locking mechanism. Overall good lock for this carrier. If you have questions about which lock will fit your carrier, call Yakima they had great customer support and told me exactly what to buy.

Click Here to see more reviews about: Yakima HitchLock with Core



Buy NowGet 10% OFF

Click here for more information about Yakima HitchLock with Core

Read More...

12/29/2011

Masterbuilt HCDR2 Hitch Mounted Double Bike Carrier Review

Masterbuilt HCDR2 Hitch Mounted Double Bike Carrier
Average Reviews:

(More customer reviews)
You can ignore the bad review the other had posted. The rack is fine and will work with any standard 2" hitch without any hassle. I suspect the other reviewer had a mini / 1.5" hitch usually found on sedans or small SUVs. Most regular SUVs and trucks come with a 2" hitch. Just keep in mind that the rack does not come with a hitch pin. You have to have one to secure the rack. Since this is my first time using the hitch, I bought a locking hitch pin.
The quality of the rack is decent and is comparable to $125 racks I saw. The included straps are actually just a roll of Velcro, but do a sufficient job of tightening down the bikes. The fit and finish of the rack are not perfect but are decent. Bottom line, this is an excellent rack for the money. If you expect to use a bike rack all the time, then you may need to invest in a high quality $200+ rack. However, if you're just going to occasionally tote around the bikes then this rack will do the job.


Click Here to see more reviews about: Masterbuilt HCDR2 Hitch Mounted Double Bike Carrier



Buy NowGet 53% OFF

Click here for more information about Masterbuilt HCDR2 Hitch Mounted Double Bike Carrier

Read More...

11/21/2011

Allen Deluxe 4-Bike Hitch Mount Rack for Vehicles with Rear Mounted Spare Tire (2-Inch Receiver) Review

Allen Deluxe 4-Bike Hitch Mount Rack for Vehicles with Rear Mounted Spare Tire (2-Inch Receiver)
Average Reviews:

(More customer reviews)
I bought this for my 2009 Jeep Wrangler and with the standard size spare tire on the trunk can only be opened about 6 inches because the thing doesn't drop low enough, but aside from that the thing's great, very sturdy and seems like it will hold up all right.

Click Here to see more reviews about: Allen Deluxe 4-Bike Hitch Mount Rack for Vehicles with Rear Mounted Spare Tire (2-Inch Receiver)

Specifically designed for vehicles with externally mounted spare tires, the Allen Deluxe 4-Bike Hitch Mount Rack allows you to carry your bicycles securely and avoid the hassles of piled bikes or high threshold rooftop mounts. Fitting vehicles with an external spare tire and a 2-inch trailer hitch, the Allen Deluxe Hitch Mount Rack is both easy to operate and super secure for your bikes. Constructed out of steel with a durable black powder finish, the rack is built to last and is backed up by a lifetime warranty by Allen.
The Allen rack boasts a patented tie-down system and individually cradles up to four bikes in the 22-inch carry arms. A separate tie down strap is included with the rack and eliminates lower bike movement completely. As easy to install as it is to use, the rack sets up in less than 5 minutes with a no-wobble bolt that holds it still within the hitch. When the rack is not in use, the carry arms quickly drop out of the way and fold down flat with a patented single pin mechanism and the rack tilts up to allow easy access to the lift gate.
Specifications:
Fits vehicles with a 2-inch trailer hitch
Holds up to four bikes
22-inch carry arms
Individual bike cradles
Steel construction
Black powder coat finish
Patented single key release system
Tie down strap
Minor assembly required

About Allen Bike Racks: In 1967, after a few years of working on the aerospace technology for the Apollo missions, Dick Allen was out of a job. Government cutbacks led Allen, a Harvard-trained physicist, to transform his garage hobby into a new industry. A cycling enthusiast, inventor, and family man, Allen had a personal need for a bike-carrying device. On weekends, he would take his sons and wife to Cape Cod or the White Mountains of New Hampshire. What proved difficult time and again was the transport of his family's bicycles. Rather than fight through inconvenience with twine and a dinged car, Allen sought an answer for himself as well as a market in which he foresaw major growth possibilities.
Always a pathfinder, Allen took to work in his Lincoln, Massachusetts garage in search of a more efficient way to transport bikes. Drafting designs during the day and constructing them throughout the night, he put together a model made of electrical conduit, metal strapping, and fire hose casings (for padding). At first, the Allens tested the prototype on weekend excursions. Finding the first trunk-mounted rack to be a success, Dick started Allen Bike Racks. Dealer acceptance came quickly, and by 1971 Allen Bike Racks were sold nationally through a number of major bicycle distributors. Today, the company owns over three-dozen patents and offers a versatile product line of bike racks while Dick's son Alex now owns and operates the business. What started out as a small garage run operation now operates three warehouses nationally, two factories abroad, and has products sold in more than a dozen countries around the world.
Manufacturer's Warranty Lifetime warranty


Buy NowGet 24% OFF

Click here for more information about Allen Deluxe 4-Bike Hitch Mount Rack for Vehicles with Rear Mounted Spare Tire (2-Inch Receiver)

Read More...

10/20/2011

Masterbuilt H2A HITCH-HAUL Lite Cargo Carrier Review

Masterbuilt H2A HITCH-HAUL Lite Cargo Carrier
Average Reviews:

(More customer reviews)
I decided to pay a little more for this lighter-weight aluminum carrier. I wanted a unit that I could easily install on my SUV by myself. This unit fits the bill quite nicely. It's 28 pounds light and very well made. It is also easy to assemble. The primary strength members are steel but the frame and mesh floor are aluminum. It has the same 500 lb. carrying capacity as the all-steel units.
I should relate also that when the unit arrived, it was missing a part. I contacted Masterbuilt and their customer support was terrific. The part was on its way the next morning. All-in-all, I am very happy with this unit and expect to use it for many years.

Click Here to see more reviews about: Masterbuilt H2A HITCH-HAUL Lite Cargo Carrier



Buy NowGet 9% OFF

Click here for more information about Masterbuilt H2A HITCH-HAUL Lite Cargo Carrier

Read More...

10/19/2011

Curt Manufacturing 45812 Adjustable Ball Mount Review

Curt Manufacturing 45812 Adjustable Ball Mount
Average Reviews:

(More customer reviews)
Pulling a jetski with it and enjoying that I can adjust the height according to the beach where I'm putting it on. Also makes easy to pull different kind of trailers, with different heights. It's well made, easy to handle.
Only 4 stars because I find the price a bit too high, otherwise great product.


Click Here to see more reviews about: Curt Manufacturing 45812 Adjustable Ball Mount



Buy NowGet 43% OFF

Click here for more information about Curt Manufacturing 45812 Adjustable Ball Mount

Read More...

10/04/2011

Reese Towpower 21141 Adjustable Ball Mount Review

Reese Towpower 21141 Adjustable Ball Mount
Average Reviews:

(More customer reviews)
This is the second one I've owned. First one was stolen so obviously, I'm not the only one who liked it. I've used this product to tow everything from a log splitter to a 28ft boat and never had a problem. It's like owning 4 hitches for the price of one. Adjusting the height is effortless and can be done in 1 inch increments. If you do alot of towing and have several different trailers, I highly recommend you look into one of these.

Click Here to see more reviews about: Reese Towpower 21141 Adjustable Ball Mount



Buy NowGet 50% OFF

Click here for more information about Reese Towpower 21141 Adjustable Ball Mount

Read More...

8/25/2011

Tow Stow Receiver Hitch - Triple Ball Mount, 1 7/8", 2", 2 5/16" balls Review

Tow Stow Receiver Hitch - Triple Ball Mount, 1 7/8, 2, 2 5/16 balls
Average Reviews:

(More customer reviews)
The Amazon description lists this as B&W model TS10047B with a 6" drop. This is NOT correct. If you check B&W's website TS10047B is the 3" drop model. TS10048B is the 5" drop model. Both are great products but please be aware of the Amazon typo when ordering.

Click Here to see more reviews about: Tow Stow Receiver Hitch - Triple Ball Mount, 1 7/8", 2", 2 5/16" balls



Buy Now

Click here for more information about Tow Stow Receiver Hitch - Triple Ball Mount, 1 7/8", 2", 2 5/16" balls

Read More...

8/09/2011

Allen Deluxe 3-Bike Hitch Mount Rack (1.25 or 2-Inch Receiver) Review

Allen Deluxe 3-Bike Hitch Mount Rack (1.25 or 2-Inch Receiver)
Average Reviews:

(More customer reviews)
I love this bike rack. The price is very reasonable and its build-quality I consider top-notch with all holes and welds being quite precise. The design has clever features that were new to me, such as being able to fold down the bike support arm when not in use so one doesn't accidentally run into it and also the ability to fold down the whole rack allowing quick and easy access through the rear door. The strap cinching system seemed cheap and goofy at first but after using it a few times I've now become quite adept at strapping and unstrapping the bikes to where it only takes a few seconds for me to do so. I now feel its quite clever in that this strapping system will accommodate any size bike tube (unlike some other bike racks I've had in the past). Its important to note that the spacing between the supports is quite wide at 14" and that might limit its use for smaller bikes, as our adult bikes just barely fit (with

Click Here to see more reviews about: Allen Deluxe 3-Bike Hitch Mount Rack (1.25 or 2-Inch Receiver)

Carry your bicycles as securely as possible and avoid the hassles of piled bikes or high threshold rooftop mounts, with the Allen Deluxe 3-Bike Hitch Mount Rack. Fitting vehicles with a 1.25 or 2-inch trailer hitch, the Allen Deluxe Hitch Mount Rack is both easy to operate and super secure for your bikes. Constructed out of steel with a durable black powder finish and with Allen's patented tie downs that keep bikes from bumping, the rack is built to last and is backed by a lifetime warranty from Allen.
The Allen rack boasts a patented tie-down system and individually cradles up to three bikes in the 16-inch carry arms. A separate tie down strap is included with the rack and eliminates lower bike movement completely. As easy to install as it is to use, the rack sets up in less than 5 minutes with a no-wobble bolt that holds it still within the hitch. When the rack is not in use, the carry arms quickly drop out of the way and fold down flat with a patented single pin mechanism and the rack tilts up to allow easy access to the lift gate.
Specifications:
Fits vehicles with a 1.25 or 2-inch trailer hitch
Holds up to three bikes
16-inch carry arms
Individual bike cradles
Steel construction
Black powder coat finish
Patented single key release system
Tie down strap
Minor assembly required

About Allen Bike Racks: In 1967, after a few years of working on the aerospace technology for the Apollo missions, Dick Allen was out of a job. Government cutbacks led Allen, a Harvard-trained physicist, to transform his garage hobby into a new industry. A cycling enthusiast, inventor, and family man, Allen had a personal need for a bike-carrying device. On weekends, he would take his sons and wife to Cape Cod or the White Mountains of New Hampshire. What proved difficult time and again was the transport of his family's bicycles. Rather than fight through inconvenience with twine and a dinged car, Allen sought an answer for himself as well as a market in which he foresaw major growth possibilities.
Always a pathfinder, Allen took to work in his Lincoln, Massachusetts garage in search of a more efficient way to transport bikes. Drafting designs during the day and constructing them throughout the night, he put together a model made of electrical conduit, metal strapping, and fire hose casings (for padding). At first, the Allen's tested the prototype on weekend excursions. Finding the first trunk-mounted rack to be a success, Dick started Allen Bike Racks. Dealer acceptance came quickly, and by 1971 Allen Bike Racks were sold nationally through a number of major bicycle distributors. Today, the company owns over three-dozen patents and offers a versatile product line of bike racks while Dick's son Alex now owns and operates the business. What started out as a small garage run operation now operates three warehouses nationally, two factories abroad, and has products sold in more than a dozen countries around the world.
Manufacturer's Warranty Lifetime warranty

Buy NowGet 44% OFF

Click here for more information about Allen Deluxe 3-Bike Hitch Mount Rack (1.25 or 2-Inch Receiver)

Read More...